€5,00
- Model:
- Base plate Berlingo V2
- Merk:
- Marpytoys
Omschrijving
Herkent u het oxidatieprobleem met de bodemplaat van uw Norev miniatuur zoals op de tweede foto?
Vanwege de slechte kwaliteit van zamac stelt Marpytoys een vervangende bodemplaat voor. De moeite die je moet doen:
- haal de modelauto uit elkaar
- plaats de wielen van het origineel onder de vervangbasis
- plaats de nieuwe bodemplaat
KLAAR!
Op aanvraag zijn er ook bodemplaten beschikbaar voor andere Norev modellen, bijvoorbeeld de Xsara Picasso
Changes made in version 2.0:
- replacement plate is now printed into 2 sections and 4 wheel arches.
- no more drilling in the PLA needed.
- much more detail in the individual layers, without any post-treatments.
Mounting instruction Norev replacement base:
Recommended tools:
- Knife
- File
- Screwdriver
Versions:
- Berlingo-phase-2 Version 2, unscrew the bottom plate and remove it with the interior section.
- Xsara Picasso, remove front-bumper and rear licence plate section. The bottom section should be free now. Soon V2 as well !!
Procedure:
1. Remove the wheels from the axes by turning them in reversed direction and gently pull.
2. Recover any additional sections from the old bottom plate, like exhaust.
3. Clean the new bottom plate for any printer-movement residue.
4. Fit and adjust if needed the overall size, by reducing the size with a file till it fits on all sides.
5. Gleu inner section to bottom plate.
6. Check if bottom fits with interior section in place, adjust where needed.
7. With the new bottom in position, refit wheels and axes.
8. Reposition other parts, recovered from step 2.
9. For Berlingo: fix the bottom with the original screw to the body.
10. For Xsara Picasso: ensure the 2 body fixations on the new bottom is open. You might consider cutting the central locks of the front bumper/rear plate holder, so it fits directly. Some glue is recommended. Position bottom and lock it in place with the front bumper and rear plate holder.
PS. The material allows hard-plastic glue to be applied, if you want to add additional elements.
photo 4, Example from Berlingo base plate:
L -> R: printed with support, overhead removed, prepared for paint..
Beoordelingen (1)
Vanwege de slechte kwaliteit van zamac stelt Marpytoys een vervangende bodemplaat voor. De moeite die je moet doen:
- haal de modelauto uit elkaar
- plaats de wielen van het origineel onder de vervangbasis
- plaats de nieuwe bodemplaat
KLAAR!
Op aanvraag zijn er ook bodemplaten beschikbaar voor andere Norev modellen, bijvoorbeeld de Xsara Picasso
Changes made in version 2.0:
- replacement plate is now printed into 2 sections and 4 wheel arches.
- no more drilling in the PLA needed.
- much more detail in the individual layers, without any post-treatments.
Mounting instruction Norev replacement base:
Recommended tools:
- Knife
- File
- Screwdriver
Versions:
- Berlingo-phase-2 Version 2, unscrew the bottom plate and remove it with the interior section.
- Xsara Picasso, remove front-bumper and rear licence plate section. The bottom section should be free now. Soon V2 as well !!
Procedure:
1. Remove the wheels from the axes by turning them in reversed direction and gently pull.
2. Recover any additional sections from the old bottom plate, like exhaust.
3. Clean the new bottom plate for any printer-movement residue.
4. Fit and adjust if needed the overall size, by reducing the size with a file till it fits on all sides.
5. Gleu inner section to bottom plate.
6. Check if bottom fits with interior section in place, adjust where needed.
7. With the new bottom in position, refit wheels and axes.
8. Reposition other parts, recovered from step 2.
9. For Berlingo: fix the bottom with the original screw to the body.
10. For Xsara Picasso: ensure the 2 body fixations on the new bottom is open. You might consider cutting the central locks of the front bumper/rear plate holder, so it fits directly. Some glue is recommended. Position bottom and lock it in place with the front bumper and rear plate holder.
PS. The material allows hard-plastic glue to be applied, if you want to add additional elements.
photo 4, Example from Berlingo base plate:
L -> R: printed with support, overhead removed, prepared for paint..
